Camry Golf Carpet for buyers outside USA/CAN – 4.5′ width – Choose Any length! + Free DIY Plan

An indoor putting green could be extremely valuable. It could be for you, or it could also be a practice area for your son/daughter. We at Camry see it as an investment. There’s no better feeling than putting at home while watching the game or the weather isn’t cooperating. An indoor putting green is not appreciated enough until it’s 100+ degrees outside or below 0 and freezing!

If you have some pretty basic tools lying around and are at least a little handy, you can do this no sweat. For reference, a 4×15′ green like the one below would cost ~$200 to build – carpet and all materials in!

Links to the exact items I purchased to build this green are also be listed below.

2×4 framing , 2×4 horizontal beams 

Topped off with 3/4” particle board for the base. 

Drill holes using hole saw – 4 1/4″. Product link: https://amzn.to/3eQ53Ar

APPLYING THE CARPET: 

Apply 3m77 spray or most reliable,  Roberts  6700 using 1/16″ trowel to FINELY spread using the teeth pattern. UNROLL Camry carpet  on for an even and gentle adhesion. smooth gently with soft book and repeat  Product Link: https://amzn.to/3x4pgsv

Slit a small ‘X’ in the carpet with an exacto-knife where the Holes are and slide in Regulation cups for a flush Look.

To Add break ; Use Furniture levers!

A Couple of Notes:

• Build it where you want to use it if you can.  It will be awkward to move.
• You can adjust this build to whatever size you want to make it.  The only tricky part may be making sure the underlayment is perfectly flush if you have to use more than 1 piece.  We suggest planning 4′ width increment greens since the particle board comes at 4′ standard from local shops.
•  Camry carpet is the best roll, and also shaves off about $100 vs the Big Moss artifical turf. Simply choose out the sizing you need from our Shop, or email us at camrygolfgreens@outlook,com for custom sizing. Prices are going to vary and we always do our best to get the best price.
• Slit an X in the carpet! people try to make the mistake of cutting out a perfect circle- thats a NO-NO. This will save you a lot of trouble and it will no doubt be cleaner than you or I can do it.  Use an exacto knife and make the x just large enough for the cups to slide in flush with the carept wedge in between the cup and wood.
• Use tarp to cover if you are placing it outside.
• With these dimensions, you can comfortably practice up to a 15ft putt and add break to it if you want. The material rolls at 11 speed, but you can use the furniture levels on one end to hit uphill putts rolling at 7-10 speed(ITS AMAZING).

I hope this helps!

Products used(from  local hardware shop or amazon) 

(optional)Carpet Padding or Foam underlayment 3mm

4.25 Hole Saw attachment – Amazon

Furniture Levelers  – Amazon  https://amzn.to/3kT7S7s

Regulation 4″ Deep Cups  – https://camrygolf.com/product/4-regulation-size-putting-cup-1-piece/

Camry Trunk Carpet Putting Surface- https://camrygolf.com/product/camry-golf-carpe…an-choose-length/

3M Carpet/ Wood All purpose Adhesive – Amazon